SALES - 678.685.8866 / SERVICE - 678.685.8893
Fuji
D-EVO GL
Achieve better patient satisfaction and reduce patient dose with Fuji FDR D-EVO GL.
​
Fuji FDR D-EVO GL long-view single exposure detector ensures consistent, easy patient positioning and repeatable image acquisition, reducing exam discomfort for a better patient experience. FDR D-EVO GL’s single exposure DR, when used with Virtual Grid software, can reduce dose as much as 50% compared to grid exams.
The Fuji FDR D-EVO-GL is 17×49 inches, expanding the traditional 14 inch CR long length field of view by 3 full inches to better accommodate a variety of patient sizes and help prevent retakes due to anatomy cut off.
​
The Fuji FDR D-EVO-GL enhances the workflow of long-view radiography by capturing the entire image in a single exposure in just a few seconds, reducing the chance for patient motion-induced artifacts and time for the patient to remain still.
Refined Dynamic Visualization image processing produces exceptional images
FDR D-EVO GL utilizes the latest Fujifilm digital image processing technology, including Dynamic Visualization, which optimizes image display based on recognition of contrast levels throughout the entire exposure field. The resulting first-up images have outstanding detail and greater window and leveling capability in PACS.
​
Intelligent Virtual Grid image processing for situations where grid use can be challenging
Virtual Grid intelligent image processing replaces the use of a grid to enhance contrast and improve clarity while reducing dose as much as 50% compared to exams performed with a grid.
​
Patented ISS capture technology promotes high sensitivity
Fujifilm’s proprietary Irradiated Side Sampling (ISS) positions its capture electronics (TFTs) at the irradiation side, in contrast to traditional detectors. This design significantly suppresses scattering and attenuation of X-ray signals, improving efficiency to produce sharper images at lower doses compared to traditional designs.
​
Noise reduction circuitry improves sensitivity in high absorption regions
A unique, Fujifilm innovation in noise reduction circuitry maximizes signal strength to improve image quality in high absorption areas. This enhancement achieves 1.7 times the DQE of previous models, with as little as 0.03mrad dose. Visibility of dense areas such as the heart and mediastinum is greatly improved.
​
SmartSwitch Technology
Fujifilm’s SmartSwitch technology enables automatic x-ray detection. FDR D-EVO GL automatically senses exposures to trigger image capture, allowing easier, faster interfacing with any x-ray system
Detector external size: 52.7 x 22.3 x 2.0 in.
Weight: Approx. 43.0 lbs.
Pixel pitch Pixels: 150 μm
Image preview: 8228 x 2832 pixels: 17 x 49 in. size reading: 9-20 sec., 17 x 17 in. size reading (single detector segment): 6 sec.
Cycle time: 17 x 49 in. size reading: 26 sec., 17 x 17 in. size reading (single detector segment): 10 sec.
D-EVO III
World’s first glass-free and lightest DR detector with patented ISS.
Fujifilm’s lightest DR detector with flexible film-based TFT circuitry
By replacing the glass-based TFT layer with a high-tech thin film layer, FDR D-EVO III is 40% lighter than the original 1st generation FDR D-EVO model and 20% lighter than FDR D-EVO II.
​
Higher DQE 33% (1Lp/mm-RQA5 1mR)
Innovative film-based capture layer helps reduce signal blur, providing excellent DQE and dose performance.
​
Enhanced durability to endure tough medical environments
By eliminating the most fragile (glass) component, the new flexible film-based TFT detector improves durability and decreases risks of shock damage compared to previous FDR D-EVO models.
Fujifilm’s exclusive technologies for achieving high resolution and low dose
Patented ISS capture technology promotes high sensitivity
Equipped with Fujifilm’s patented Irradiated Side Sampling (ISS) technology which bonds its capture electronics (TFTs) to the x-ray irradiation side, in contrast to traditional detectors. This design suppresses scattering and attenuation of x-ray signals, to produce sharper images at lower doses compared to traditional designs.
​
Unique formulation of large and small phosphor particles at a optimal ratios, enhances x-ray absorption
Increased x-ray absorption is achieved through our uniquely formulated scintillator layer, which employs photographic film technology to optimize the blending ratio of phosphor particles to minimize blur and enhance sharpness.
​
Fujifilm’s noise reduction circuitry improves detector sensitivity in high absorption and low dose images
Uniquely engineered noise reduction circuitry reduces noise in the image to improve signal strength. This results in 33% DQE even at 0.1mR. The granularity and visibility of dense, low penetration or ultra low dose regions are improved.
Improved handling
Simple battery replacement workflow
The battery can easily be replaced with one hand and the detector can be back up and ready in ~90 seconds. This eliminates concerns about battery life or on-demand battery swaps even in the midst of critical care.
​
Suitable for outdoor use with an expanded spectrum
Supports 2.4GHz and 5GHz (W52/53/56/58)* spectrum. Suitable for outdoor use during disaster response.
​
Memory Mode
Dedicated memory mode enables added emergency uses. Built-in memory stores up to 100 images. Images are retained even if detector power is interrupted. Digital readout on detector face tracks images stored and increments as they are acquired.
​
Flexibility – On-Demand Use
FDR D-EVO III’s unique combination of form and function brings significant value to traditional room retrofit and mobile uses. The additional capabilities of Memory Mode and Smart Switch bring added value for emergency, on-demand backup and failsafe uses with any portable, room or even for remote off-site and disaster response uses.
Advanced image processing
Virtual Grid: High quality images without a physical grid
Advanced processing simulates scatter clean up without a physical grid, correcting for the effects of scatter radiation while retaining contrast and sharpness. Eliminating the grid improves patient comfort, simplifies positioning and allows as much as 50% lower dose compared to grid exams. Grid cutoff and retakes associated with misalignment of X-ray tube and grid are also prevented.
​
Dynamic Visualization II: Intelligent feature recognition technology optimizes image quality
Advanced algorithms optimize contrast and density based on anatomic definition, hardware and thickness characteristics, resulting in outstanding detail and greater window and leveling capability in PACS.
FDR D-EVO III G35 (14 x 17”)
Type: Detector with patented ISS (Irradiation Side Sampling) and flexible film-based TFT detector technology
Scintillator: GOS (Gadolinium oxysulfide)
Detector external size: 18 x15 x 0.6″ approx., (460˜ x 384˜ x 15mm)
Weight: 4 lbs. (1.8 kg) excludes battery
Pixel pitch: 150μm, 16 bits per pixel
Pixels: 2836 x 2336 pixels
Image preview: Less than 2 sec
Cycle time: Less than 9 sec (wired), Less than 10 sec (SmartSwitch)
Battery recharging time: Approx. 3 hours (with battery charger), Approx. 4 hours (with Docking Stand)
FDR D-EVO III G43 (17 x 17”)
Type: Detector with patented ISS (Irradiation Side Sampling) and flexible film-based TFT detector technology
Scintillator: GOS (Gadolinium oxysulfide)
Detector external size: 18 x 18 x 0.6″ approx. (460 x 460 x 15mm)
Weight: 4.6 lbs. (2.1 kg) excludes battery
Pixel pitch: 150μm, 16 bits per pixel
Pixels: 2836 x 2336 pixels
Image preview: Less than 2 sec
Cycle time: Less than 10 sec (wired), Less than 11 sec (SmartSwitch)
Battery recharging time: Approx. 3 hours (with battery charger), Approx. 4 hours (with Docking Stand
​
FDR ES
Fujifilm FDR ES
Enhance your workflow with Fujifilm’s latest DR detector and image processing. The FDR ES offers fast, seamless integration with any x-ray room to transition to the speed, image quality and dose benefits of Fujifilm Digital Radiography.
​
Fuji FDR ES detectors are the next generation of DR (Digital Radiography) retrofit solutions designed with the conveniences of Fujifilm image acquisition and design. Light, portable, affordable detectors can optimize your x-ray room for table and free positioning and table top exams with top of the line image quality. There’s also no need to re-work your existing equipment because FDR ES fits existing standard Buckys and holders.
​
The FDR ES is the ideal choice when:
Facilities need to perform straightforward, in-room exams
The solution must provide affordability without sacrificing image quality
Fujifilm’s proprietary technology for high resolution and low dose
​
Equipped with Irradiated Side Sampling (ISS) technology, which positions its capture electronics (TFTs) at the irradiation side, in contrast to traditional detectors. This design significantly suppresses scattering and attenuation of x-ray signals, improving efficiency to produce sharper images at lower doses compared to traditional designs.
​
Noise Reduction Circuitry improves detector sensitivity in high absorption regions
​
A unique, Fujifilm innovation in noise reduction circuitry maximizes signal strength to improve image quality in high absorption areas. This enhancement achieves 1.7 times the DQE of previous models, with as little as 0.03mr dose. Visibility of dense areas such as the heart and mediastinum are greatly improved.
​
FDX Console refined image processing provides exceptional images
​
Simple, efficient workflow and image processing deliver high diagnostic value with minimal patient impact. Virtual Grid intelligent image processing corrects for the effects of scatter radiation while retaining high contrast and sharpness. It improves patient comfort, simplifies positioning, and allows for as much as 50% lower dose compared to grid exams.
​
FDR ES Features
​
Sleek carbon fiber frame with rounded edges and smooth corners creates a durable and lightweight design
Extended battery life for less frequent battery changing
IPX-3 rating provides an extra safeguard during use and cleaning
Fuji’s detector innovation improves image quality and dose efficiency through advanced processing, combined with patented ISS technology and improved circuitry performance
​
FDR ES Models
FDR ES 24x30cm CsI (C24)
FDR ES 14x17in Csl (C35)
FDR ES 17x17in Csl (C43)
FDR ES 14x17in GOS (C24)
FDR ES 17x17in GOS (C24)
FDX Console
Fujifilm FDX Console
Fujifilm medical systems just introduced a new version of its technologist workstation, the “FDX Console.” The new workstation offers a wide variety of advanced features and benefits to the user, including more customized tools for every facility’s and technologist’s preferences. The FDX Console also offers newly enhanced image processing called Dynamic Visualization™.
This new tool recognizes the region of interest and automatically applies the optimum processing, producing the highest quality first-up diagnostic images. Dynamic Visualization™ not only offers a more dynamic range of the final image but also allows for the histogram analysis to collect more clinical data while streamlining the customer’s workflow. The new processing will enhance the image appearance, especially in the more difficult exposures such as lateral spine examinations and bariatric studies.